Engineered Comfort Fan Coil Controller EZstat Especificaciones Pagina 8

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 20
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 7
D8
6-25-07
FAN COIL UNIT CONTROLS
Analog Fan Coil Unit Controller
MODEL: CEE-5201
The Engineered Comfort CEE-5201 controller is mounted
inside the controls enclosure on the fan coil unit and is factory
wired. Engineered Comfort fan coil units with analog controls
provide extremely accurate variable air volume control. They
are factory calibrated for each unit permitting quick and easy
start-up with no field settings required, but may be simply and
easily field adjusted if necessary to suit changing
requirements.
Control Parameters:
Maximum fan cooling airflow.
Minimum fan cooling airflow.
Modulating Chilled Water Valve Actuator.
Stage 1 Heating with aux. fan airflow setting (on / off hot
water valve or one stage electric heat).
Stage 2 Heating with aux. fan airflow setting (on / off hot
water valve or two stage electric heat).
Five potentiometers on the controller permit simple
adjustment of flow settings with a 0 – 10 Vdc voltmeter. Meter
taps are provided. A calibration chart is provided inside the
controls enclosure for each unit.
Figure 1. CEE-5201 Analog Fan Coil Unit Controller.
Figure 2. Typical Calibration Chart.
Specifications:
Supply Voltage: 24 VAC +20/-15% 50/50Hz
Supply Power: 1 VA plus output loads
Discharge Temp Input: 10K OHM@25ºC, NTC 4.37% / ºC
Fan Output: Min. Adjustable 0 – 10 VDC
Stage 1 Max adjustable from Min. to 10 VDC
Stage 2 Max adjustable from stage 1 Max to 10VDC
Cooling Max adjustable from Min. to 10 VDC
CWV Output: Max adjustable from 0 to 10 VDC
Heat Stage 1 & 2 Outputs: Triac outputs 10VA Max @ 24VAC
Thermostat connector: PIN 1 NC
PIN 2 DC COM
PIN 3 Supply Output 16 VDC +/-10% 10mA
PIN 4 T in 1-10 VDC 100 KOHM
PIN 5 DC COM
PIN 6 NC
Connections: Plated screw terminals 14 to 22 AWG Cu
RJ-11 thermostat jack
Ambient Limits: Operating 0 to 120ºF (-18 to 49ºC)
Shipping -40 to 140ºF (-40 to 60ºC)
Mounting: Open Board / Snaptrack supplied
Vista de pagina 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Comentarios a estos manuales

Sin comentarios